Fork & Grabs

The Albutt range of Fork and Grabs covers models for use on Tractor Loaders, Telehandlers and Loading Shovels. A market leading specification ensures that the Albutt range of Fork and Grabs provides a longer operating life whilst providing excellent usability. For Hardox tine models, we use genuine Hardox material to provide resistance to bending and breaking against conventional tines. B-Series and C-Series models also incorporate a heavy duty grab stop which prevents against over extension of the grab, resisting against pin breakages and ram seals leaking.

Ranges

B Series – For machines with a 4 tonne plus lift capacity
C Series – For machines with a 2-4 tonne lift capacity
E Series – For Tractor Loaders

Brand name: Albutt

Model name: Fork & Grabs

Solid fork back – keep carriage and hydraulics clean

Wide opening grabs

Choice of Forged steel or genuine Hardox tines

Cut outs in fork back for visibility

High capacity hydraulic rams

Open and close grab stops to protect hydraulic rams and pins – B and C Series

Optional side tines; Hardox

Full width base wear strip protects tine holder

Hardox tines welded into tine holder

Forged tines bushed into the tine holder

Tees on rams inward facing for spill protection – B and C Series

For machines with a minimum 4 tonne lift capacity
Hardox tines available only on B-Series
35mm Ø top and bottom plated pins
45mm Ø pivot plated pins
Heavy duty grab stops for ram seal and pin protection
75mm Ø bore rams
Grab opens to 1905mm
1240mm long genuine Hardox Base Tines
DX bushes in cylinder ends
Inward facing tees on rams
Large side visibility cut outs
Full width base wear strip

For machines with a minimum 2-4 tonne lift capacity
KV type tines as standard. Add ‘HXG’ to any part no. for Hardox tines
35mm Ø top and bottom plated ram pins
45mm Ø pivot plated pins
Heavy duty grab stops for ram seal and pin protection
75mm Ø bore rams
Grab opens to 1480mm
Base Tine length; Hardox 970mm / KV type 1020mm
DX bushes in cylinder ends
Inward facing tees on rams
Central ‘albutt’ visibility cut out
Large side visibility cut outs
Full width base wear strip
Extra grab and base tine compared to industry standard

For Tractor Loaders and Skidsteers
Add ‘HX’ to any part number for Hardox Tines
25mm Ø top and bottom plated pins
30mm Ø pivot plated pins
60mm Ø bore rams
Optional side tines
Grab opens to 1060mm
Base Tine length; Hardox 800mm / KV type 760mm
Large side visibility cut outs
Full width base wear strip

Click Here to Download