|
|
|
|
The GRASS-MANAGER-PRO is the consequently further developed version of the GRASS-MANAGER that has been proven in years. Every section is mounted on a parallelogram. One hydraulic cylinder per section ensures a perfect adaption to uneven ground and an optimal pressure compensation of the sections. The pressure can easily be adjusted from the tractor. A heavy triangular front levelling plate in front of the support wheels evens the mole hills.
Solid frame
Lower and top lift link mountings equipped with hardened bushings
Heavy, spring suspended front levelling bar (triangular) working in front of the support wheels
Weeder sections parallel guided with hydraulic level control
Tines ø 8 mm, 490 mm long
Tines made from patented pulled spring steel wire
Non twisting tine pipe – weeder sections 6 rows with central tine adjustment
Improved vibrating effect because of special tine holder
Free movement of the tine (no danger of breaking)
Line spacing 2.5 cm
Large, bearing mounted support wheels
Dimension 16 x 6.50/8 (on the main frame duals)
Parking support
Transport width 3.00 m
Tines 490 mm long, ø 7 mm instead of standard tine
Tines 490 mm long STRAIGHT, ø 8 mm instead of standard tine
Tines 490 mm long, ø 10 mm instead of standard tine
Tines 490 mm long STRAIGHT, ø 10 mm instead of standard tine
Tine loss protection Warning signs and lights
On the GRASS-MANAGER-PRO a pneumatic airseeder or the ROTOSEEDER can be retro tted any time
(please ask for the special brochures)
Front mounting frame